Jim Meyer Racing Products
Jim Meyer Racing Products Home Page Products Products Support About Us Contact Us Call Us
Pixel Gif
Jim Meyer On His Bonniville Record Breaking Bike
Pixel Gif

Pixel Gif

Sign Up For Our Newsletter

Email:



Search Our Site

Results Open A New Window


Jim Meyer Racing

Promote Your Page Too

Pixel Gif
Home
Products
Brake Options
Chassis Mounted Brake Pedal Assembly
Pixel Gif

Chassis Mounted Brake Pedal Assembly



Chassis Brake Pedal Option

If you want to keep your firewall clean this is the way to go! We can put the M/C and booster under the floor on any chassis. Itís a good idea to cut an inspection plate hole in your floor, under the carpet, so you can fill the M/C. A 7-inch diameter booster is about the largest diameter that will comfortably go under the tri-five body.




Chassis Brake Pedal Option

The double-diaphragm 7-inch diameter booster is about as large a diameter that will go under the floor. The M/C has a 1-inch diameter bore to feed the 4-piston Wilwood calipers and the rear drum brakes. We offer complete -4 brake line kits for all of our tri-five chassis or we can plumb the chassis for you complete with brake line brackets welded to the frame with clips and bulkhead fittings, proportioning valve and stainless steel braided brake lines.


Chassis Brake Pedal Option

Looking at the bottom of the brake pedal and pushrod, you can see the 1 Ĺ-inch diameter holes in the frame. The one nearest the frame rail is for plumbing, while the pushrod uses the upper hole.








Add A Clutch Pedal



Chassis Brake Pedal Option

The Jim Meyer unit emulates the original underfloor pedal arm design with optional M/Cís, boosters and proportioning valves available.





Jim Meyer Racing Products Inc.
2795 S.E. 23rd, Lincoln City, OR 97367
Order (800) 824-1752 * Tech (541) 994-7717
Fax (541) 994-2397

All Content & Images Copyright ©
Jim Meyer Racing Products Inc. 2005 - 2015
Contact Our Webmaster Or Sales Department